重组Anti-RUNX1 / AML1抗体[EPR23044-100] - BSA and Azide free
Anti-RUNX1 / AML1 antibody [EPR23044-100] - BSA and Azide free
- BOND RX™ Validated
- Recombinant
- Advanced Validation
- RabMAb
- 了解详情
Be the first to review this product! Submit a review
|
(0 Publication)
Rabbit Recombinant Monoclonal RUNX1 / AML1 antibody. Carrier free. Suitable for ChIC/CUT&RUN-seq, IP, WB, ICC/IF, Flow Cyt (Intra), IHC-P and reacts with Human samples.
查看别名
AML1, CBFA2, RUNX1, Runt-related transcription factor 1, Acute myeloid leukemia 1 protein, Core-binding factor subunit alpha-2, Oncogene AML-1, Polyomavirus enhancer-binding protein 2 alpha B subunit, SL3-3 enhancer factor 1 alpha B subunit, SL3/AKV core-binding factor alpha B subunit, CBF-alpha-2, PEA2-alpha B, PEBP2-alpha B
- Flow Cyt (Intra)
Unknown
Flow Cytometry (Intracellular) - Anti-RUNX1 / AML1 antibody [EPR23044-100] - BSA and Azide free (AB264471)
Intracellular flow cytometric analysis of 4% paraformaldehyde fixed 90% methanol permeabilized Jurkat (Human T cell leukemia T lymphocyte) cells labelling RUNX1 / AML1 with ab240639 at 1/500 (Red) compared with a Rabbit monoclonal IgG (ab172730, Black) isotype control and an unlabelled control (cells without incubation with primary antibody and secondary antibody) (Blue). A Goat anti rabbit IgG (Alexa Fluor®488, ab150077) at 1/2000 dilution was used as the secondary antibody.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab240639).
- IHC-P
Unknown
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-RUNX1 / AML1 antibody [EPR23044-100] - BSA and Azide free (AB264471)
Immunohistochemical analysis of paraffin-embedded Human breast carcinoma tissue labeling RUNX1 / AML1 with ab240639 at 1/2000 dilution (0.25 μg/ml) followed by a ready to use Rabbit specific IHC polymer detection kit HRP/DAB (ab209101). Nuclear staining on human breast carcinoma (PMID : 24967588) tissue is observed. The section was incubated with ab240639 for 15 mins at room temperature. The immunostaining staining was performed on a Leica Biosystems BOND®RX instrument. Counterstained with Hematoxylin.
Secondary antibody only control : Secondary antibody is a ready to use Rabbit specific IHC polymer detection kit HRP/DAB (ab209101).
Heat mediated antigen retrieval with Tris-EDTA buffer (pH 9.0, epitope retrieval solution 2) for 20 mins.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab240639).
- IHC-P
Unknown
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-RUNX1 / AML1 antibody [EPR23044-100] - BSA and Azide free (AB264471)
Immunohistochemical analysis of paraffin-embedded Human breast tissue labeling RUNX1 / AML1 with ab240639 at 1/2000 dilution (0.25 ug/ml) followed by a ready to use Rabbit specific IHC polymer detection kit HRP/DAB (ab209101). Nuclear staining on human breast tissue is observed. The section was incubated with ab240639 for 15 mins at room temperature. The immunostaining staining was performed on a Leica Biosystems BOND® RX instrument. Counterstained with Hematoxylin.
Secondary antibody only control : Secondary antibody is a ready to use Rabbit specific IHC polymer detection kit HRP/DAB (ab209101).
Heat mediated antigen retrieval with Tris-EDTA buffer (pH 9.0, epitope retrieval solution 2) for 20 mins.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab240639).
- ICC/IF
Unknown
Immunocytochemistry/ Immunofluorescence - Anti-RUNX1 / AML1 antibody [EPR23044-100] - BSA and Azide free (AB264471)
Immunofluorescent analysis of 4% Paraformaldehyde-fixed, 0.1% TritonX-100 permeabilized Jurkat (Human T cell leukemia T lymphocyte) cells labelling RUNX1 / AML1 with ab240639 at 1/100 dilution, followed by ab240639 anti-RUNX1/AML1 ab150077 AlexaFluor®488 Goat anti-Rabbit secondary antibody at 1/1000 dilution (Green). Confocal image showing strong nuclear and weak cytoplasmic staining in Jurkat cell line is observed. ab195889 Anti-alpha Tubulin antibody [DM1A] - Microtubule Marker (Alexa Fluor® 594) was used to counterstain tubulin at 1/200 dilution (Red). The Nuclear counterstain was DAPI (Blue).
Secondary antibody only control : Secondary antibody is ab240639 anti-RUNX1/AML1 ab150077 AlexaFluor®488 Goat anti-Rabbit secondary at 1/1000 dilution.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab240639).
- IP
Unknown
Immunoprecipitation - Anti-RUNX1 / AML1 antibody [EPR23044-100] - BSA and Azide free (AB264471)
RUNX1 / AML1 was immunoprecipitated from 0.35 mg Jurkat (human T cell leukemia T lymphocyte) whole cell lysate 10ug with ab240639 at 1/30 dilution (2ug in 0.35mg lysates). Western blot was performed on the immunoprecipitate using ab240639 at 1/1000 dilution. VeriBlot for IP Detection Reagent (HRP) (ab131366) was used at 1/5000 dilution.
Lane 1 : Jurkat (human T cell leukemia T lymphocyte) whole cell lysate 10ug
Lane 2 : ab240639 IP in Jurkat whole cell lysate
Lane 3 : Rabbit monoclonal IgG (ab172730) instead of ab240639 in Jurkat whole cell lysate
Blocking and dilution buffer and concentration : 5% NFDM/TBST.
Exposure time : 10 seconds
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab240639).
All lanes:
Immunoprecipitation - Anti-RUNX1 / AML1 antibody [EPR23044-100] (<a href='/products/primary-antibodies/runx1-aml1-antibody-epr23044-100-ab240639'>ab240639</a>)
Predicted band size: 48 kDa
false
- WB
Lab
Western blot - Anti-RUNX1 / AML1 antibody [EPR23044-100] - BSA and Azide free (AB264471)
This data was developed using ab240639, the same antibody clone in a different buffer formulation.
Western blot : Rabbit Monoclonal [EPR23044-100] to RUNX1 / AML1 ab240639 staining at a 1/200 dilution, shown in black; Mouse anti-CANX (ab238078) loading control staining at 1/20,000 dilution, shown in magenta. A band was observed at 50-54 kDa in Wild-type U-87 MG cell lysates with no signal observed at this size in RUNX1 knockout U-87 MG cell line.
To generate this image, samples were run on an SDS-PAGE gel then transferred onto a nitrocellulose membrane. Membranes were blocked in 3pc Milk in TBS-0.1 % Tween® 20 (TBS-T) before incubation with primary antibodies overnight at 4 °C. Blots were washed four times in TBS-T, incubated with secondary antibodies for 1 h at room temperature, washed again four times then imaged. Secondary antibodies used were Goat anti-Rabbit HRP (H+L) & Goat anti-Mouse 680RD at 1/20,000 dilution.
Lanes 1 - 4:
Western blot - Anti-RUNX1 / AML1 antibody [EPR23044-100] (<a href='/products/primary-antibodies/runx1-aml1-antibody-epr23044-100-ab240639'>ab240639</a>) at 1/200 dilution
Lanes 1 - 4:
Western blot - Anti-RUNX1 / AML1 antibody [EPR23044-100] - BSA and Azide free (ab264471) at 1/200 dilution
Lane 1:
Wild-type U-87 MG at 40 µg
Lane 2:
Western blot - Human RUNx1 knockout U-87 MG cell line (ab306773) at 40 µg
Lane 3:
Jurkat at 20 µg
Lane 4:
Caco-2 at 20 µg
Secondary
All lanes:
Goat anti-Rabbit HRP (H+L) & Goat anti-Mouse 680RD at 1/20000 dilution
Predicted band size: 48 kDa
Observed band size: 50-54 kDa
true
Exposure time: 10s
- ChIC/CUT&RUN-seq
Supplier Data
ChIC/CUT&RUN sequencing - Anti-RUNX1 / AML1 antibody [EPR23044-100] - BSA and Azide free (AB264471)
ChIC/CUT&RUN was performed using a pAG-MNAse at a final concentration of 700 ng/mL, 2.5 x 10^5 K-562 (Human chronic myelogenous leukemia lymphoblast) cells and 5µg of ab240639 [EPR23044-100]. The resulting DNA was sequenced on the Illumina NovaSeq 6000 to a depth of 10 million reads. The negative IgG control ab172730 is also shown. Additional screenshots of mapped reads can be found in the Protocol booklet in the Product Protocol section. The University of Geneva owns patents relevant to ChIC (Chromatin Immuno-Cleavage) methods. This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab240639).
不同偶联物与剂型 (1)
-
Anti-RUNX1 / AML1 antibody [EPR23044-100]
反应性数据
产品详情
ab264471 is the carrier-free version of ab240639.
Patented technology
Our RabMAb® technology is a patented hybridoma-based technology for making rabbit monoclonal antibodies. For details on our patents, please refer to RabMAb® patents.
What are the advantages of a recombinant monoclonal antibody?
This product is a recombinant monoclonal antibody, which offers several advantages including:
- - High batch-to-batch consistency and reproducibility
- - Improved sensitivity and specificity
- - Long-term security of supply
- - Animal-free batch production
For more information, read more on recombinant antibodies.
Conjugation ready
Our carrier-free antibodies are typically supplied in a PBS-only formulation, purified and free of BSA, sodium azide and glycerol. This conjugation-ready format is designed for use with fluorochromes, metal isotopes, oligonucleotides, and enzymes, which makes them ideal for antibody labelling, functional and cell-based assays, flow-based assays (e.g. mass cytometry) and Multiplex Imaging applications.
Use our conjugation kits for antibody conjugates that are ready-to-use in as little as 20 minutes with 1 minute hands-on-time and 100% antibody recovery: available for fluorescent dyes, HRP, biotin and gold.
Compatibility
This product is compatible with the Maxpar® Antibody Labeling Kit from Fluidigm, without the need for antibody preparation. Maxpar® is a trademark of Fluidigm Canada Inc.
性能和储存信息
形式
纯化工艺
存储溶液
运输条件
推荐的短期储存条件
推荐的长期储存条件
储存信息
补充信息
This supplementary information is collated from multiple sources and compiled automatically.
Biological function summary
RUNX1 is essential in the formation of blood cells and is part of the core-binding factor (CBF) complex. This complex is a heterodimer comprising RUNX1 and the CBFβ subunit. The interaction between RUNX1 and CBFβ stabilizes the DNA binding capability of RUNX1 facilitating the activation of target gene transcription. The proper functioning of RUNX1 is necessary for the maintenance of normal lineage specification of hematopoietic progenitors affecting both myeloid and lymphoid cell lineages.
Pathways
RUNX1 plays a significant role in the Wnt signaling pathway and the TGF-beta signaling pathway. RUNX1 interacts with several proteins in these pathways including SMAD proteins and β-catenin which are important for transmitting extracellular signals that regulate cell growth and differentiation. RUNX1’s role in these pathways highlights its importance not only in hematopoiesis but also in preventing abnormal cell proliferation.
产品实验方案
- Visit the General protocols
- Visit the Troubleshooting
- Download chicCutRunSequencingBooklet|en
靶点信息
Abcam Product Promise
Please note: All products are 'FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC OR THERAPEUTIC PROCEDURES'.
For licensing inquiries, please contact partnerships@abcam.com